Freenas After Install Tries to Install Again

FreeNAS Corral has been released only a calendar week ago, yet information technology has already reached its fans' hearts thanks to its sleek interface and its new features. Today we'll look at how to install it in 5 easy steps.

About FreeNAS Corral

Corral is (as of the moment I'm writing this article) the latest release of FreeNAS, based on FreeBSD 11. It brings many improvements and above all, a new sleek, polished and asynchronous spider web User Interface. In the example yous missed what's new, here you tin accept a look at the new features.

About this guide

Important

I accept absolutely NO responsibility of what you lot practice with your machine; use this tutorial every bit a guide and remember you can possibly crusade data loss if you lot touch things carelessly.

This guide is not intended for newbies, FreeNAS is a little more complicated than usual Linux distributions. If you merely want to start learning about the *naught world I suggest y'all start here or here.

Y'all should apply ECC retention; using not-ECC memory is a potential threat to your data and should be avoided. FreeNAS Corral has a suggested minimum 8GB of retention. From my tests, unlike FreeNAS 9, attempting to utilize 4GB will heavily affect performance and should exist avoided.

Requirements

In order to install Corral successfully you will demand:

• A machine with a 64-bit processor.
• At least 8GB of RAM (ECC is preferred although not strictly required).
• A kicking medium (CD/DVD, USB, whatever).
• If yous plan to install FreeNAS on a USB pendrive you tin can't apply that aforementioned drive to boot from (you volition need two USB drives).

Installing FreeNAS Corral

ane) Preparations

The start thing you have to practice to proceed with the installation of FreeNAS Corral is to boot it from a back up (CD/DVD and USB Pendrives are today the all-time options).
In one case you accept your back up, reboot the auto, select an pick like "kicking options" or "kicking priority list" and select your support, in this way you should meet this screen. Press enter and then enter a second fourth dimension.

2) Install card

If everything went correctly, you lot should see this screen which is quite self-explanatory. But select option ane and press enter.

3) Selecting install destination

In this step you will become a list of the possible destinations for your FreeNAS Corral installation. The most common destination is a USB device (you can also select a disk, however FreeNAS won't allow you to use that same disk as storage). If you lot want to install FreeNAS on USB search for entries starting with da, if you desire to install on a deejay search for entries starting with ad. Check your pick twice: the installation will completely erase the destination. When yous're set click enter and confirm.

4) Root password

Y'all will exist prompted to select a root password (that you will utilize during the initial setup). It is suggested to pick a stiff password since theroot user can practice anything to your car and if someone were to judge that password you would exist in danger.

v) Kick mode

In this step y'all have to decide how FreeNAS volition be booted from the destination you lot are installing it onto. If you lot're running on a automobile which but uses UEFI you will of course select UEFI. Other systems may let turning off UEFI boot (also called legacy fashion by some vendors), in that case the choice of whether to utilise UEFI or BIOS is up to yous, if y'all choose to utilize Legacy, recollect to disable the UEFI mode in your UEFI.

6) Installation successful

If everything went smoothly you will now run across this screen. Practise as you are told: press ok to render to the menu, then issue a shutdown past selecting the appropriate option, after that remove the installation media (not the one y'all installed FreeNAS onto if yous used a USB pendrive). And then power up your auto (you should also configure the BIOS/UEFI settings to brand your computer boot from the destination of your installation past default). At this signal the installation is over.

7) Boot environments

From hither you volition exist able to select the different boot environments. At the first kick y'all will have only 1, but they will start growing equally time passes and updates are released. Selecting ane will prompt you lot to select one mode, the default one is fine. Proceed in listen that the first fourth dimension you kick a new FreeNAS installation it can have quite some time (even 10-20 minutes).

eight) CLI

This screen means that you installed and booted FreeNAS Corral correctly. ThisCLI is a new feature and replaces the old (neat) menu. From here you can change organization settings, they can as well be modified through the web UI that can exist accessed through another figurer by going to the provided accost (in my example: 10.0.2.15).

nine) Configuring network

A thing you might desire to do before accessing the web interface is to configure the network interfaces. Information technology is wise to set a static IP and disable DHCP in order to continue your server in a known position (address-wise). To do so you but have to outcome 2 commands:

# network interface em0 set dhcp=fake # network interface em0 alias create accost=YOURADDRESS netmask=YOURNETMASK

Of course you lot should replace em0 with the actual interface you desire to configure (it might be unlike for y'all), and y'all should replace YOURADDRESS and YOURNETMASK with the actual values you desire.

10) Spider web Interface

That's it! Go to another calculator connected to your local network and betoken your browser to the address given past FreeNAS. If everything went the correct way you volition run across this screen. From here use the username root and the password you set on stride iv to log in the web interface.

---

Determination

You lot now know what the basic requirements for a Corral installations are. The process itself isn't that difficult and resembles the FreeNAS 9 installation, although the role regarding configuring the network is completely different because of the new CLI.

Paradigm courtesy of mark | marksei

The following 2 tabs change content below.

• Bio
• Latest Posts

The Information technology guy with a slight wait of boredom in his optics. Freelancer. Current interests: Kubernetes, Tensorflow, shiny new things.

warnerbradoet1971.blogspot.com

Source: https://www.marksei.com/install-freenas-10-corral-5-easy-steps/

Share this post